xStack
®
DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
197
SSH
SSH is an abbreviation of Secure Shell, which is a program allowing secure remote login and secure network services
over an insecure network. It allows a secure login to remote host computers, a safe method of executing commands
on a remote end node, and will provide secure encrypted and authenticated communication between two non-trusted
hosts. SSH, with its array of unmatched security features is an essential tool in today’s networking environment. It is a
powerful guardian against numerous existing security hazards that now threaten network communications.
The steps required to use the SSH protocol for secure communication between a remote PC (the SSH client) and the
Switch (the SSH server) are as follows:
1. Create a user account with admin-level access using the User Accounts window in the
Configuration
folder.
This is identical to creating any other admin-level User Account on the Switch, including specifying a
password. This password is used to logon to the Switch, once a secure communication path has been
established using the SSH protocol.
2. Configure the User Account to use a specified authorization method to identify users that are allowed to
establish SSH connections with the Switch using the
SSH U ser Authentication
window. There are three
choices as to the method SSH will use to authorize the user, which are
Host Based
,
Password
and
Public
Key
.
3. Configure the encryption algorithm that SSH will use to encrypt and decrypt messages sent between the SSH
client and the SSH server, using the
SSH Authmode and Algorithm Settings
window.
4. Finally, enable SSH on the Switch using the
SSH Settings
window.
After completing the preceding steps, a SSH Client on a remote PC can be configured to manage the Switch using a
secure, in band connection.
SSH Settings
The following window is used to configure and view settings for the SSH server.
To view this screen click,
Security > SSH > SSH Settings
Figure 6 - 29 SSH Settings window
To configure the SSH server on the Switch, modify the following parameters and click
Apply
:
Parameter Description
SSH Server State
Enable or disable SSH on the Switch. The default is
Disabled
.
Max Session (1-8)
Enter a value between
1
and
8
to set the number of users that may simultaneously access the
Switch. The default setting is
8
.
Connection
Timeout (120-600)
Allows the user to set the connection timeout. The use may set a time between
120
and
600
seconds. The default setting is
120
seconds.
Authfail Attempts
(2-20)
Allows the Administrator to set the maximum number of attempts that a user may try to log on
to the SSH Server utilizing the SSH authentication. After the maximum number of attempts
has been exceeded, the Switch will be disconnected and the user must reconnect to the
Switch to attempt another login. The number of maximum attempts may be set between
2
and
20
. The default setting is
2
.
Summary of Contents for DES-3528 - xStack Switch - Stackable
Page 19: ...xStack DES 3528 DES 3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual 18...
Page 214: ...xStack DES 3528 DES 3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual 213...
Page 306: ...xStack DES 3528 DES 3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual 305...