D-Link DES-3528 - xStack Switch - Stackable, User Manual, Page: 113 / 322

xStack
®
DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
112
MLD Snooping Multicast VLAN Settings
This window is used to configure the MLD Snooping Multicast VLAN settings on the Switch.
To view this window, click
L2 F eatures > M LD S nooping > MLD S nooping Multicast V LAN S ettings
as shown
below:
Figure 3 - 58 MLD Snooping Multicast VLAN Settings window
The following fields can be set:
Parameter Description
VLAN Name
This is the VLAN Name that, along with the VLAN ID, identifies the VLAN the user wishes to
modify the MLD Snooping Settings for.
VID (2-4094)
This is the VLAN ID that, along with the VLAN Name, identifies the VLAN the user wishes to
modify the MLD Snooping Settings for.
State
Use the drop-down menu to toggle between Enabled and Disabled.
Replace Source IP
Enter an IP address that new IP address to be used.
Member Port
(e.g.:1,6)
Select the ports that will be members of the Multicast VLAN. (Eg. Ports 1 to 4 and port 6)
Source Port
(e.g.:1,6)
Select the source Port for the Multicast VLAN.
Tagged Member
Port (e.g.:1-4,6)
Select the ports that will be tagged as members of the VLAN.
To modify an entry click the corresponding
Modify
button. To remove an entry click the corresponding
Delete
button.