D-Link DES-3528 - xStack Switch - Stackable, User Manual, Page: 259 / 322

xStack
®
DES-3528/DES-3552 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
258
• PIR (64Kbps)
– Specifies the Peak Information Rate of the packet. Tha range is from 0
to 15624 . The unit is 64Kbps. That is to say, 1 means 64Kbps.
• CBS (Kbyte)
– Specifies the Committed Burst Size of the packet. Tha range is from 0 to
16384 . The unit is Kbyte. That is to say, 1 means 1Kbyte. This parameter is optional and
the default value is 4*1024. The max value is 16*1024.
• PBS ( Kbyte)
– Specifies the Peak Burst Size of the packet. Tha range is from 0 to
16384 .The unit is Kbyte. That is to say, 1 means 1Kbyte. This parameter is optional and
the default value is 4*1024. The max value is 16*1024.
srTCM
– Single Rate Three Color Marker, marks packets green, yellow or red based on a rate
and two burst sizes. This is useful when only burst size matters.
• CIR (64Kbps)
– Specifies the Committed Information Rate of the packet. Tha range is
from 0 to 15624 . The unit is 64Kbps. That is to say, 1 means 64Kbps.
• CBS (Kbyte)
– Specifies the Committed Burst Size of the packet. Tha range is from 0 to
16384 . The unit is Kbyte. That is to say, 1 means 1Kbyte. This parameter is optional and
the default value is 4*1024. The max value is 16*1024.
• EBS (K byte)
– Specifies the Excess Burst Size of the packet. Tha range is from 0 to
16384 . The unit is Kbyte. That is to say, 1 means 1Kbyte. The maximum value is
16*1024.
Action Conform
– Specifies the action when the packet is in “green color” mode.
• Replace dscp
– Change the dscp of the packet.
• Counter -
Specifies the counter. This is optional. The default is Disabled .
Exceed
– Specifies the action when the packet is in “yellow color” mode.
• Permit
– Permits the packet.
• Replace DSCP
– Allows you to change the DSCP of the packet.
• Drop
– Drops the packet.
• Counter -
Specifies the counter. This is optional. The default is Disabled .
Violate
– Specifies the action when the packet is in “red color” mode.
• Permit
– Permits the packet.
• Replace DSCP
– Change the DSCP of the packet.
• Drop
– Drops the packet.
• Counter -
Specifies the counter. This is optional. The default is Disabled .
Click
Apply
to implement changes made, click
Back
to return to the ACL Flow Meter.