D-Link DES-3350SR Standalone Layer 3 Switch
47
Switch’s reaction to Broadcast storms,
triggered at the threshold set in the last field.
Multicast Storm
<
Disabled
>
This field can be toggled between
Enabled
and
Disabled
using the drop-down menu.
This enables or disables, globally, the
Switch’s reaction to Multicast storms,
triggered at the threshold set above.
Destination Lookup
Fail <
Disabled
>
This field can be toggled between
Enabled
and
Disabled
using the drop-down menu.
This enables or disables, globally, the
Switch’s reaction to Destination Address
Unknown storms, triggered at the threshold
set above.
Threshold <
128
>
This is the value in units of packets per
second, beyond which the ingress port for
that block discards packets. Each port
contains three counters, one each for
Broadcast, Multicast, and Destination
Lookup Fail packets. The counters are
cleared every second. If the counter for a
particular type of packet exceeds this
threshold within one second, then further
packets of that type will be dropped.
802.1p Default Priority
The switch allows the assignment of a default 802.1p priority to each port on the switch.
Click
802.1p default_priority
in the
QoS
folder on the
Configuration
menu:
Summary of Contents for DES-3350SR
