D-Link DES-3350SR Standalone Layer 3 Switch
33
probability the port will be chosen to forward
packets.
Default port cost:
100Mbps port = 200000
Gigabit ports = 20000
Priority
A Port Priority can be from
0
to
240
. The
lower the number, the greater the probability
the port will be chosen as the Root Port.
Migration
<No>
Select
Yes
or
No
. Choosing
Yes
will enable
the port to migrate from 802.1d STP status to
802.1w RSTP status. RSTP can coexist with
standard STP, however the benefits of RSTP
are not realized on a port where an 802.1d
network connects to an 802.1w enabled
network. Migration should be enabled (
Yes
)
on ports connected to network stations or
segments that will be upgraded to 802.1w
RSTP on all or some portion of the segment.
Edge
<No>
Select
Yes
or
No
. Choosing
Yes
designates
the port as an edge port. Edge ports cannot
create loops, however an edge port can lose
edge port status if a topology change creates
a potential for a loop. An edge port normally
should not receive BPDU packets. If a BPDU
packet is received it automatically loses edge
port status.
No
indicates the port does not
have edge port status.
P2P
<No>
Select
Yes
or
No
. Choosing
Yes
indicates a
point-to-point (p2p) shared link. These are
similar to edge ports, however they are
restricted in that a p2p port must operate in
full duplex. Like edge ports, p2p ports
transition to a forwarding state rapidly thus
benefiting from RSTP.
Unicast Forwarding
To enter a MAC address into the switch’s forwarding table, click on the
Forwarding Filtering
folder on the
Configuration
menu
and then click
Unicast Forwarding
:
Figure 7 - 13. Setup Static Unicast Forwarding Table window
The following fields can be set:
Parameter
Description
VLAN ID
Allows the entry of the VLAN ID of the
VLAN the MAC address below is a member of
−
when editing. Displays the VLAN ID the
currently selected MAC address is a member
of
−
when editing an existing entry.
MAC Address
Allows the entry of the MAC address of an
end station that will be entered into the
Summary of Contents for DES-3350SR
