D-Link DES-3350SR Standalone Layer 3 Switch
124
Figure 9 - 42. IGMP State Transitions
IGMP Interface Settings
The Internet Group Multicasting Protocol (IGMP) can be configured on the Switch on a per-IP interface basis. Click
Configuration >
Layer 3 IP Networking
>
IP Multicast Routing Protocol >
IGMP Interface Settings
to view the window
shown below.
Each IP interface configured on the Switch is displayed in the below
IGMP Interface Settings
dialog box. To
configure IGMP for a particular interface, click the corresponding hyperlink for that IP interface. This will open another
IGMP
Interface Settings Edit
window:
Figure 9 - 43. IGMP Interface Table
Figure 9 - 44. IGMP Interface Configuration window
This window allows the configuration of IGMP for each IP interface configured on the Switch. IGMP can be configured as
Version
1 or 2 by toggling the Version field using the pull-down menu. The length of time between queries can be varied by
entering a value between 1 and 31,744 seconds in the
Query Interval
field. The maximum length of time between the receipt of a
query and the sending of an IGMP response report can be varied by entering a value in the
Max Response Time
field.
Summary of Contents for DES-3350SR
