D-Link DES-3350SR Standalone Layer 3 Switch
115
To change an existing set in the list, type the
Area ID
of the set you want to change, make the changes and click the
Apply
button.
The modified OSPF area ID will appear in the table.
See the parameter descriptions below for information on the
OSPF Area ID Settings
.
The
Area ID
settings are as follows:
Parameters Description
Area ID
A 32-bit number in the form of an IP
address (xxx.xxx.xxx.xxx) that uniquely
identifies the OSPF area in the OSPF
domain.
Type
This field can be toggled between
Normal
and
Stub
using the space bar. When it is
toggled to
Stub
, additional fields appear
−
Stub Import Summary LSA,
and the
Stub
Default Cost
.
Stub Import
Summary LSA
Displays whether or not the selected Area
will allow Summary Link-State
Advertisements (Summary LSAs) to be
imported into the area from other areas.
Stub Default Cost
Displays the default cost for the route to
the stub of between 0 and 65,535. The
default is 1.
OSPF Interface Settings
To set up OSPF interfaces, click
Configuration > Layer 3 IP Networking > OSPF > OSPF Interface Settings
to view OSPF
settings for existing IP interfaces. If there are no IP interfaces configured (besides the default System interface), only the System
interface settings will appear listed. To change settings for in IP interface, click on the hyperlinked name of the interface to see the
configuration menu for that interface.
Figure 9 - 29. OSPF Interface Settings window
Figure 9 - 30. OSPF Interface Settings - Edit window
Summary of Contents for DES-3350SR
