manualshive.com logo in svg

D-Link DES-3326SR, User Manual

Share
Download
D-Link DES-3326SR User Manual Download Page 67

DES-3326SR Layer 3 Fast Ethernet Switch User’s Guide 

55

 

Tagging and Untagging 

Every port on an 802.1Q compliant switch can be configured as 

tagging 

or 

untagging.

 

Ports with tagging enabled will put the VID number, priority 
and other VLAN information into the header of all packets that 
flow into and out of it. If a packet has previously been tagged, 
the port will not alter the packet, thus keeping the VLAN 
information intact.  The VLAN information in the tag can then 
be used by other 802.1Q compliant devices on the network to 
make packet forwarding decisions.  

Ports with untagging enabled will strip the 802.1Q tag from all 
packets that flow into and out of those ports. If the packet 
doesn’t have an 802.1Q VLAN tag, the port will not alter the 
packet.  Thus, all packets received by and forwarded by an 
untagging port will have no 802.1Q VLAN information. 

 

(Remember that the PVID is only used internally within the 
switch).  Untagging is used to send packets from an 802.1Q-
compliant network device to a non-compliant network device. 

Ingress Filtering 

A port on a switch where packets are flowing into the switch 
and VLAN decisions must be made is referred to as an 

ingress 

port

.  If ingress filtering is enabled for a port, the switch will 

examine the VLAN information in the packet header (if present) 
and decide whether or not to forward the packet.   

If the packet is tagged with VLAN information, the ingress port 
will first determine if the ingress port itself is a member of the 
tagged VLAN.  If it is not, the packet will be dropped.  If the 
ingress port is a member of the 802.1Q VLAN, the switch then 
determines if the destination port is a member of the 802.1Q 
VLAN.  If it is not, the packet is dropped.  If the destination 
port is a member of the 802.1Q VLAN, the packet is forwarded 

Summary of Contents for DES-3326SR








































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands