D-Link DES-3326SR, User Manual

Page: 180 / 359

DES-3326SR Layer 3 Fast Ethernet Switch User’s Guide
168
show stacking {mode/version}
Using the optional parameter mode displays only the stacking
mode of the switches in the switch stack.
Using the optional parameter version displays only the
stacking firmware version of the switches in the switch stack.
Entering the show stacking command with no parameters
returns all of the relevant stacking information for all of the
switches in the stack:
Figure 6 - 16. Console CLI show stack Command
The same switch stack information is displayed in the console
as is displayed in the Web-based management agent.
The config stack command allows you to configure the switch
stack manually.
The syntax of the config stacking command is as follows:
config stacking mode
[auto/master/slave/standalone]
One of the parameters auto/master/slave/standalone must
be entered along with the config stacking mode command.
These parameters have the following effects: