D-Link DES-3326SR, User Manual

Page: 186 / 359

DES-3326SR Layer 3 Fast Ethernet Switch User’s Guide
174
The following fields can be set:
Parameter Description
State <Enabled> Toggle the State <Enabled> field to
either enable or disable a given port.
Speed/Duplex
<Auto>
Toggle the Speed/Duplex <Auto> field
to either select the speed and
duplex/half-duplex state of the port.
Auto – auto-negotiation between 10
and 100 Mbps devices, full- or half-
duplex. The Auto setting allows the
port to automatically determine the
fastest settings the device the port is
connected to can handle, and then to
use those settings. The other options
are
100M/Full , 100M/Half, 10M/Full,
and 10M/Half. There is no automatic
adjustment of port settings with any
option other than
Auto .
Flow Control: Auto
Displays the flow control scheme used
for the various port configurations.
Ports configured for full-duplex use
802.3x flow control, half-duplex ports
use backpressure flow control, and
Auto ports use an automatic selection
of the two.
Port Security
<Disabled>
Allows the selected port (or port’s)
dynamic MAC address learning to be
locked such that new source MAC
addresses can not be entered into the
MAC address table for the locked port.
It can be changed by toggling between
Disabled and Enabled .