DES-1228/ME Metro Ethernet Managed Switch Hardware Installation Guide
Chapter 5 – Web-based Switch Configuration
Page | 28
W
EB
P
AGES
When you connect to the management mode of the Switch with a Web browser, a login window is displayed. Enter a
user name and password to access the Switch's management mode.
Below is a list and description of the folders and main windows available in the Web interface:
Configuration
– Contains main windows concerning Device Information, System Information, Serial Port Settings,
IP Address, IPv6 Interface Settings, IPv6 Route Settings, IPv6 Neighbor Settings, Port Configuration, Static ARP
Settings, User Accounts, System Log Configuration, DHCP Relay, DHCP Auto Configuration Settings, MAC
Address Aging Time, Web Settings, Telnet Settings, Password Encryption, CLI Paging Settings, Firmware
Information, SNTP Settings, SMTP Settings, MAC Notification Settings, SNMP Settings, Gratuitous ARP, and ARP
Spoofing Prevention Settings and PPPoE Circuit ID Insertion Settings.
L2 Features
– Contains main windows concerning Jumbo Frame, 802.1Q Static VLAN, VLAN Trunk, GVRP
Settings, Asymmetric VLAN Settings, PVID Auto Assign Settings, Port Trunking, LACP Port Settings, Traffic
Segmentation, L2PT Settings, BPDU Protection Settings, IGMP Snooping, Port Mirror, Loopback Detection
Settings, Spanning Tree, Forwarding & Filtering, and LLDP.
QoS
– Contains main windows concerning Bandwidth Control, Traffic Control, 802.1p Default Priority, 802.1p User
Priority, QoS Scheduling Settings, Priority Mapping, TOS Mapping, and DSCP Mapping.
Security
– Contains main windows concerning Safeguard Engine, Trusted Host, IP-MAC-Port Binding, Port
Security, 802.1X, SSH, Access Authentication Control, DoS Prevention Settings, and DHCP Server Screening.
ACL
– Contains the main windows concerning ACL Configuration Wizard, Access Profile List, CPU Access Profile
List, ACL Finder, and ACL Flow Meter.
Monitoring
– Contains main windows concerning Cable Diagnostic, CPU Utilization, Port Utilization, Packet Size,
Memory Utilization, Packets, Errors, Port Access Control, Browse ARP Table, Browse VLAN, IGMP Snooping,
LLDP, Browse Session Table, MAC Address Table, and System Log.
Save & Tools
– Contains main windows concerning Save Configuration, Save Log, Save All, Configuration File
Upload & Download, Upload Log File, Reset, Ping Test, Download Firmware, and Reboot System.
NOTE:
Be sure to configure the user name and password in the User Accounts window before
connecting the Switch to the greater network.
