background image

71

D-Link DCS-930L User Manual

Appendix E - Warranty

•  After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package 

to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. 

Please refer to shipping and packaging instructions located online at http://rma.dlink.com.

•  The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD 

will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer and shipped 

to 

D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708

. D-Link will not be held responsible for any packages 

that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common 

carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in the United States, otherwise 

we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are 

prepaid by the customer. 

D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an 

RMA number is not visible from the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping 

charges for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to 

be defective or non-conforming.

Submitting A Claim (Canada):

 The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and 

the product is within warranty, the customer shall submit a claim to D-Link as outlined below:

•  Customers need to provide their receipt (proof of purchase) even if the product is registered. Without a receipt, no warranty service will 

be done. The registration is not considered a proof of purchase.

•  The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance 

in sufficient detail to allow D-Link to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase 

invoice for the product) if the product is not registered.

•  The customer must obtain a Case ID Number from D-Link Technical Support at 1-800-361-5265, who will attempt to assist the customer 

in resolving any suspected defects with the product. If the product is considered defective, the customer must obtain a Return Material 

Authorization (“RMA”) number by completing the RMA form and entering the assigned Case ID Number at https://rma.dlink.ca/.

•  After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to 

ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not 

include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship 

Summary of Contents for DCS-930L













































































Reviews: