20
D-Link DCS-930L User Manual
Section 2 - Installation
Manual Installation
If you prefer to set up your camera without using the Camera Setup Wizard, follow the steps below.
Note:
In order to use the mydlink features of this product, you should use either the Camera Setup Wizard or Zero Configuration Setup.
To learn more about mydlink, refer to
“What is mydlink?” on page 24
.
Connect the Power Cable and Ethernet Cable
Step 1
Attach the power supply to the power receptor located on the back of the DCS-930L and
connect it to a wall outlet or power strip. Power is confirmed when the Power LED is lit.
Configure Your Camera
Step 3
Refer to
“Configuration” on page 25
for instructions on how to configure your camera.
Step 2
If using an Ethernet connection, connect the included Ethernet cable to the Ethernet port
on the back of the camera. Plug the other end into an available port on your router.
If your router supports Wi-Fi Protected Setup, you can initiate a wireless connection with
your router using WPS. Refer to
“WPS - Push Button Setup” on page 21
.
