38
D-Link DCS-930L User Manual
Section 4 - Configuration
SMTP Server
Address:
SMTP Server
Port:
Sender E-mail
Address:
Receiver E-mail
Address:
User Name:
Password:
This is the domain name or IP address of your external e-mail server.
This is the port used by your external e-mail server.
This is the e-mail address of the account sending the camera images.
This is the e-mail address to send the images to.
If the SMTP server uses authentication, you must enter your
User Name
here.
Enter the
Password
that corresponds to your user name to connect to the SMTP
server.
This section allows you to configure the e-mail notification settings for your camera.
For example, if you want to use Gmail by SSL-TLS for e-mail notification, you can follow these steps:
Step 1
- Enter
smtp.gmail.com
in the
SMTP Server Address
field.
Step 2
- Change the
SMTP Server Port
number from 25 to
465
.
Step 3
- Enter your gmail
E-mail Address
in
Sender E-mail Address
.
Step 4
- Enter the destination
E-mail Address
in
Receiver E-mail Address
.
Step 5
- Enter the
User Name
required to access the SMTP server.
Step 6
- Enter the
Password
required to access the SMTP server.
Step 7
- Select
SSL-TLS
and then click
Save Settings
.
Step 8
- Click
Test
at the bottom of the screen to send a test e-mail to the
Receiver E-mail Address
.
Note:
• If you want to use
STARTTLS,
use SMTP server port
587
.
• If you want to use the Yahoo SMTP server, the SMTP server address will be different between each
registered region. It only supports using SMTP server port
465
for
SSL-TLS
.