![background image](http://html.mh-extra.com/html/d-link/dcs-6314/dcs-6314_user-manual_77674021.webp)
21
D-Link DCS-6314 User Manual
Section 2: Assembly and Installation
Attaching the Camera to the Bent Mount
Step 1
Begin by attaching the mounting plate to the bracket cap
using the three screws as shown in the diagram.
Step 2
Use the included mounting guide to mark the proper
placement of the mounting holes on the ceiling. Drill the
corresponding holes.
Step 3
Place the rubber seal onto the mounting part of the bent
bracket. Securely mount the rubber seal between the
bent bracket and the ceiling. If you need more details see
"Deploying the Camera" on page 14
.
Step 4
Attach the bracket cap by rotating it counterclockwise, in
order to tighten it onto the bent bracket.
Bracket
Cap
Mounting
Plate
Bracket
Cap
Bent
Bracket