![background image](http://html.mh-extra.com/html/d-link/dcs-6314/dcs-6314_user-manual_77674023.webp)
23
D-Link DCS-6314 User Manual
Section 2: Assembly and Installation
Orienting the Camera
Step 1
Turn the lens module left and right until the desired position
is achieved.
Step 2
Loosen the tilt screws on both sides of the camera, and turn
the lens module up and down until the desired position is
achieved. Tighten the tilt screws.
Step 3
Turn the lens to adjust the IP camera’s image until the desired
orientation is achieved.
The DCS-6314 can be adjusted to ensure an optimal viewing
position when mounted to a wall by following the steps
outlined.