D-Link DCS-340 User Manual
Section 3 - Configuration
The Default port is 21. To connect to an
FTP server, it is recommended that you do
not change the port number unless your
camera is behind a router. If your camera
is behind a router, you can assign any port
number to this field, but you must enable
port forwarding on the router. Please refer
to your router manual for more information
on port forwarding.
If you are going to upload snapshots to
an FTP server, you will need to fill in the
Domain name or IP address of your internal/
external FTP server such as ftp://dlink.com
or ftp://192.168.0.123. (The server name
and IP address will vary depending on the
user.) The following user settings must be
correctly configured for remote access.
The port of the FTP server. The default is
21 for an external FTP site.
Specify the user name to access the
external FTP server (e.g. John Smith).
Specify the password to access the external
FTP server (e.g. 12345).
In this window, enter the settings for the FTP server you wish to upload the image to. Optionally, you can enter settings
for a secondary backup FTP server.
Local FTP
server port:
1st FTP server:
1st FTP server
port:
1st FTP
password:
1st FTP user
name:
