4
D-Link DCS-340 User Manual
Section 3 - Configuration
Check this option to turn on the motion
detection.
The name of the motion detection
window.
Sensitivity meter allows the user to set
how sensitive for the motion triggering.
The sensitivity is based on pixel change
of the video image.
Percentage meter allows use to specify
how many percentage of the motion
screen is changed to trigger the motion
detection. Lower percentage gives higher
sensitivity of the motion detection.
Adds new windows that monitor specific
area of the image window. Up to 3 motion
detection windows can be added.
Saves the new windows settings.
Enable motion
detection:
Motion Detection
Window name:
Sensitivity:
Percentage:
New:
Save:
A green bar means the image variation is under the monitoring level, and no motion detection alert is triggered. A red
bar means the image variation is over the monitoring level and a motion detected alert is triggered. When
the bar goes red, the window that the motion is detected in will also be outlined in red (note: remember that
you can have up to 3 windows selected for motion detection). You can return to the DCS-3420 Home Page
and the monitored window will not be visible, but the red frame will show on the home page when motion is
detected.
