![background image](http://html1.mh-extra.com/html/d-link/dcs-2210l-upa/dcs-2210l-upa_user-manual_3174755041.webp)
41
D-Link DCS-2210L/UPA User Manual
Section 4: Configuration
Event Setup
In a typical application, when motion is detected, the DCS-2210L sends images to a FTP server or via e-mail as notifications. As shown in the
illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices. When an event is
triggered, a specified action will be performed. You can configure the DCS-2210L to send snapshots or videos to your e-mail address or FTP site.
To start plotting an event, it is suggested to configure server and media columns first so that the DCS-2210L will know what action shall be
performed when a trigger is activated.
Event
Condition
Action
Media
(what to send)
Server
(where to send)
ex.
Motion Detection,
Periodically, Digital
Input, System Reboot
ex.
Snapshot, Video Clips
ex.
E-mail, FTP