11
D-Link DCS-2210L/UPA User Manual
Section 2: Installation
Zero Configuration Setup
If you have a D-Link Cloud Router
, you can take advantage of Zero Configuration Setup. Zero Configuration automatically
configures your camera's settings for you, and adds it to your mydlink account automatically. This type of setup allows you to
set up your camera by simply plugging it in and connecting it to your router.
Connect your camera to your mydlink-enabled Cloud Router and Zero Configuration will automatically configure your
DCS-2210L and automatically add the camera to your mydlink account. You can now remotely access your camera from the
mydlink.com website to manage and monitor your DCS-2210L.
Connect the Ethernet Cable
If using a Power over Ethernet (PoE) connection: Connect the included Ethernet
cable to the Ethernet port located on the back of the DCS-2210L and connect it
to your router.
Attach the External Power Supply (optional)
Attach the external power supply to the DC Power receptor located on the rear
panel of the DCS-2210L and connect it to your wall outlet or power strip.
