D-Link DAP-2610 User Manual
16
Wireless Band:
Mode:
Network Name (SSID):
Auto Channel Selection:
Channel:
Channel Width:
AP MAC Address:
Select either
2.4GHz
or
5GHz
from the drop-down
menu.
WDS
is selected from the drop-down menu.
Service Set Identifier (SSID) is the name designated
for a specific wireless local area network (WLAN). The
SSID’s factory default setting is
dlink
. The SSID can
be easily changed to connect to an existing wireless
network or to establish a new wireless network.
Enabling this feature automatically selects
the channel that will provide the best wireless
performance. This feature is not supported in WDS
mode.
All devices on the network must share the same
channel. To change the channel, use the drop-down
menu to make the desired selection.
Click the drop-down menu to select
20 MHz, Auto
20/40 MHz
or
Auto 20/40/80 MHz
. Select
20 MHz
if you are not using any 802.11n wireless clients.
Auto 20/40 MHz
allows you to connect to both
802.11n and 802.11b/g or 802.11a wireless devices
on your network.
Enter the MAC addresses of the root AP of this WDS
network. If left empty, then this device is the root AP.
WDS Mode
