D-Link DAP-2610 User Manual
13
Channel:
Channel Width:
Authentication:
To change the channel, first toggle the
Auto Channel Selection
setting to
Disable
, and then use the drop-down menu to make
the desired selection.
Note:
The wireless adapters will automatically scan and match the wireless settings.
Allows you to select the channel width you would like to operate in. Select
20 MHz
if you are not using any 802.11n wireless
clients.
Auto 20/40 MHz
allows you to connect to both 802.11n and 802.11b/g or 802.11a wireless devices on your network.
Use the drop-down menu to choose
Open System
,
Shared Key
,
WPA-Personal
,
WPA-Enterprise
, or
802.1x
.
• Select
Open System
to communicate the key across the network (WEP).
• Select
Shared Key
to limit communication to only those devices that share the same WEP settings. If multi-SSID is
enabled, this option is not available.
• Select
WPA-Personal
to secure your network using a password and dynamic key changes. No RADIUS server is required.
• Select
WPA-Enterprise
to secure your network with the inclusion of a RADIUS server.
• Select
802.1X
if your network is using port-based Network Access Control.
