D-Link DAP-2610 User Manual
60
This page allows the user to configure a WLAN Partition.
Wireless Band:
Link Integrity:
Ethernet WLAN Access:
Internal Station Connection:
Displays the current wireless band.
Select
Enable
or
Disable
. If the Ethernet
connection between the LAN and the AP is
disconnected, enabling this feature will cause
the wireless segment associated with the AP
to be disassociated from the AP.
The default is
Enable
. When disabled, all
data from the Ethernet to associated wireless
devices will be blocked. Wireless devices can
still send data over the Ethernet interface.
The default value is
Enable
, which allows
stations to intercommunicate by connecting
to a target AP. When disabled, wireless
stations cannot exchange data on the same
Multi-SSID. In Guest mode, wireless stations
cannot exchange data with any station on
your network.
WLAN Partition
