32
D-Link DWL-8200AP User Manual
LAN Settings
Static (Manual)
is chosen here. Choose this option if you do not have
a DHCP server in your network, or if you wish to assign a static IP
address to the
DWL-8200AP
. When
Dynamic (DHCP)
is selected
the other fields here will be greyed out.
The default IP address is 192.168.0.50. Assign a static IP address
that is within the IP address range of your network.
Enter the subnet mask. All devices in the network must share the
same subnet mask.
Enter the IP address of the gateway in your network. If there isn’t
a gateway in your network, please enter an IP address within the
range of your network.
Get IP From:
IP Address:
Subnet Mask:
Default Gateway:
LAN is short for Local Area Network. This is considered your internal network. These
are the IP settings of the LAN interface for the
DWL-8200AP
. These settings may be
referred to as private settings. You may change the LAN IP address if needed. The LAN
IP address is private to your internal network and cannot be seen on the Internet.
Summary of Contents for D DWL-8200AP DWL-8200AP
