![background image](http://html.mh-extra.com/html/d-link/d-dwl-8200ap-dwl-8200ap/d-dwl-8200ap-dwl-8200ap_product-manual_78335090.webp)
90
D-Link DWL-8200AP User Manual
Multi-SSID
When Multi-SSID is enabled, you can configure your SSIDs for either
Both
,
11a
only, or
11g
only networks.
Check to use VLAN.
Select the wireless band (
IEEE802.11a
or
IEEE802.11g
).
Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID’s factory default
setting is
default
. The SSID can be easily changed to connect to an
existing wireless network or to establish a new wireless network.
Enter a VLAN number (0 - 4094).
You can select up to 7 MSSIDs per band, the default MSSID is the
primary, which puts the total to 8 MSSIDs per band.
Enable Multi-SSID:
Enable VLAN:
Band:
SSID:
VLAN ID:
MSSID Index:
Summary of Contents for D DWL-8200AP DWL-8200AP
