D-Link AirPro DWL-6000AP User Manual Download Page 68 | Manualshive

Page: 68 / 74

background image

AirPro

DWL-6000AP

Software:

Warranty service for software products may be obtained by contacting a D-Link office within
the applicable warranty period. A list of D-Link offices is provided at the back of this

manual, together with a copy of the Registration Card. If a Registration Card for the
product in question has not been returned to a D-Link office, then a proof of purchase (such
as a copy of the dated purchase invoice) must be provided when requesting warranty service.

The term "purchase" in this software warranty refers to the purchase transaction and
resulting licence to use such software.

D-Link warrants that its software products will perform in substantial conformance with the

applicable product documentation provided by D-Link with such software product, for a
period of ninety (90) days from the date of purchase from D-Link or its Authorized Reseller.
D-Link warrants the magnetic media, on which D-Link provides its software product,

against failure during the same warranty period. This warranty applies to purchased
software, and to replacement software provided by D-Link pursuant to this warranty, but
shall not apply to any update or replacement which may be provided for download via the

Internet, or to any update which may otherwise be provided free of charge.

D-Link's sole obligation under this software warranty shall be to replace any defective
software product with product which substantially conforms to D-Link's applicable product

documentation. Purchaser assumes responsibility for the selection of appropriate
application and system/platform software and associated reference materials. D-Link
makes no warranty that its software products will work in combination with any hardware,

or any application or system/platform software product provided by any third party,
excepting only such products as are expressly represented, in D-Link's applicable product
documentation as being compatible. D-Link's obligation under this warranty shall be a

reasonable effort to provide compatibility, but D-Link shall have no obligation to provide
compatibility when there is fault in the third-party hardware or software. D-Link makes no
warranty that operation of its software products will be uninterrupted or absolutely error-

free, and no warranty that all defects in the software product, within or without the scope of
D-Link's applicable product documentation, will be corrected.

66

«
...
66
67
68
69
70
...
»

Summary of Contents for AirPro DWL-6000AP











































































Reviews:

No comments

Related manuals for AirPro DWL-6000AP

Brand: Barracuda Networks Pages: 2

Elinx EIRP305-T

Brand: B&B Electronics Pages: 19

Brand: Wave wifi Pages: 2

Brand: Paradyne Pages: 45

TotalStorage SAN16M-R SAN

Brand: IBM Pages: 116

Brand: Teac Pages: 20

cMT-FHDX Series

Brand: Maple Systems Pages: 2

Brand: NETGEAR Pages: 2

DM/IP601-CPCI-100BT

Brand: Dialogic Pages: 2

Brand: Toto Link Pages: 55

Brand: KYLAND Technology Pages: 24

BiPAC 5200S RC Series

Brand: Billion Pages: 79

Brand: ProSoft Pages: 53

Brand: Hi-flying Pages: 59

Brand: B&B Electronics Pages: 2

Brand: Garderos Pages: 21

WISENET XRN-1610

Brand: Hanwha Techwin Pages: 88

Brand: TRENDnet Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands