F0.125A
F0.125A
F1.25A
F6.3A
TEST
516
12/16
RZN 43xx-E
99.821.70 3.5/01/12
- weather plug-in card for
- wind-/ rain transmitter
- central vent button
- temperature control
- weather automatic On/ Off
- operational control central
Open/ Close
- wind force sensitivity adjustable
- signal retention time adjustable
- wind/ rain indication Closed
- Functions:
You can select an infinitely variable wind-force setting between 2 and 8 on
the Beaufort scale using the regulator on the plug-in unit.
As soon as the
wind force reaches the set value (time lag of a few seconds), the signal is
displayed on the plug-in card and, if available, on the control panel.
If the automatic weather control is ON, the system closes automatically. This
is given priority, even over an attempted opening by temperature control.
The wind signal remains active for an adjustable length of time to prevent
continuous actuator operation during gusty wind conditions. The regulator
on the plug-in unit
can be used to select the infinitely adjustable signal
storage time between 1 and 15 minutes.
Encoding WE 516
Weather plug-in card WE 516
Connection WE 516
LT 43-W
close
–N
open
P
P
S
ZZ2
–N
ZMP1
ZMP2
1
2
3
4
5
6
7
8
9
10
11
WE 516
rain
wind
wind
–
+
1
2
4
3
5
7
6
8
9
R
W
WRG 82
S 1/1
S 1/2
P3
P4
rain
+
wind
–N
AZ
ZZ1
–T
ITR 79
1
6
2
7
4
3
5
230VAC
5
1
3
RTR 230 *
open
close
-
potential free
wind/rain indication to
further control panels
max. 60V / 1A
Function WE 516
Automatic rain control:
Automatic temperature control:
Manual Control:
If the automatic weather control is on, the system will close automatically when it starts to rain. A signal, if available, will be indicated on module/ plug-in unit
and on the control panel.
To test, place a moist finger on the surface. Clean rain detector electrodes and insulator with mild soap water in the case of dirt accumulation and rinse off
thoroughly.
Ventilation control is carried out by a room temperature controller, if available, and if the Automatic temperature control is switched on and if no wind / or rain
signal is indicated.
If a wind / or rain signal is present, this has priority and it will close the system.
The system fully opens or closes fully by pressing the
or
button once briefly .
Pressing both buttons at the same time or pressing the “Stop” button on the operator panel stops the system at any intermediate position.
Manual control is only enabled if no wind, rain or temperature signal is being processed or if the automatic control has been deactivated.
