To tighten the rear brake cable, locate the thumbscrew on
the inner side of the back wheel, and rotate it clockwise.
Keep testing by pressing the brake lever as you rotate the
nut, until you are satisfied with the tightness of the brake.
WARNING
When you rotate the wheel
the wheel should run freely. When the brake lever is
depressed the wheel should come to a complete stop
and with the lever held firm the wheel should not move.
5.7.5 BRAKE ADJUSTMENT
Rear Brakes
The mechanical rear brakes respond to a pull on the left-hand lever. When you pull the
lever, the rear wheels should immediately lock. Over time and with consistent use, it is
common to see a brake cable loosen.
Front Bakes
The front brakes are electronic and adjustable and respond to a pull on the right lever. You
can adjust the front brake settings on your HMI screen.
ONE DRIVE MODE
On the main HMI menu, scroll to Vehicle Settings, then select E-ABS / ON to activate
the electronic ABS. This setting will activate
ONE DRIVE MODE
. You can then adjust the
amount of power delivered to that system.
E-ABS Power
This setting enables you to choose how much braking force is generated on the front
wheels when you release the accelarator with
ONE DRIVE MODE
enabled. You can toggle
between the following options -
• 25%
• 50%
• 75%
• 100%
WARNING
Always remember to apply the rear brakes first.
1. Using the Wheel Bolt Star
Key remove the five bolts on
the outer wheel rim.
2. Remove the wheel ring and
slide off the tire and inner tube
as one.
3. Replace the inner tube, or
tire and slide back on together,
lining up the valve correctly.
5. Inflate the tire with 50PSI.
Do not exceed
. Then replace
the dust cap.
4. Replace the wheel ring and
bolts, following the correct
tightening sequence.
5.7.6 TIRE AND TUBE REPLACEMENT
You may wish to change your tires, for performance purposes or for maintenance and
repair. You are able to do so very easily, with a tool provided in your tool roll. First,
let the air out of your tire, then follow these instructions to complete a tire and tube
replacement:
WARNING
Always deflate your tire(s) completely before removing the wheel
bolts to change them or replace your inner tube.
55
Summary of Contents for DRAGONFLY
