7
Now we unlock the angle in the second box,
before leaning it on the first (in this configuration
the rear trigger is hidden).
To do this we will move the handles on the
sides of the box up to the end where you will hear
a click.
At that time the rear trigger will come out, the
handle will lock, and it will unlock the angle.
Taking the second enclosure by the handles,
we will lower it gently upon the first enclosure, until
it rests upon it.
Remove the safety pins on each side of the
enclosure, and to anchor the enclosure we will use
these pins, as shown in the figures.
This figure shows mounting of two enclosures on a
PL-20S
platform.
Side handle
Hidden rear trigger
Visible rear trigger
Front
security
pins
Note: We can leave the front rods
prepared for stacking the third box.
Click !
Manual de Colgado
/ aero series /
Rigging Manual
