ARRAY MOUNTING WITH GROUPS OF 4 UNITS ON A
PL-20S
The groups of 3 or 4 units are easy to
transport by truck.
Lets see in this section how to mount an array
with groups of four units.
Firstly, we will mount the
AX-AE20
onto the top
enclosure of the first group of four units.
Therefore, to mount the
AX
, the rods of the
upper unit of the group should be extracted, as
explained in the previous section.
The result is shown in the figure at the right.
Then, place the side parts of the
AX
inserting
safety pins, as shown in the figure below.
Check that the security pins are well positioned
because they will support the weight of the rest of
the enclosures.
DETAIL
RESULT
Note:
Select 0º angle and the
safety pin should put it
to lock the rear rod
Rods
11
Manual de Colgado
/ aero series /
Rigging Manual
