CwmSetup.exe is a Windows program which discovers the IP address of the
CWM and allows a new IP Address to be assigned. It can be downloaded from
Cytech website at:
http://www.cytech.biz/software.html
It also launches the browser-based configuration program which sets up other
parameters like the Webserver port, Internet connection method, DNS and
gateway addresses, FTP addresses etc.
The CwmSetup program screen is shown below:
Figure 3.2 - CWM Setup Screen
The program identifies the MAC address and IP Address of the CWMs on the
local network. The button “Change IP Address” allows the selected CWM IP
address to be changed from the default 10.0.0.16. Change the IP address so
that it is on the same subnet as the computer used to configure the CWM. For
example, if the computer IP address is 192.168.0.1 and the subnet mask is
255.255.255.0, then the CWM can be set to any IP address from 192.168.0.2
(as not to clash with computer’s IP) to 192.168.0.254 to be on the same
subnet.
Click on “Configure” to continue to configure the CWM. This opens a series of
browser-based screens. The Comfort Web Module Administration page will first
open.
Comfort Webserver Module CWM02
13
