Getting Started With EZ-
BLE™ PRoC™ Module
www.cypress.com
Document No.: 001-96841 Rev. **
43
Program the Device
This section shows how to program the device. If you are
using a development kit with a built-in programmer,
connect the kit board to your computer using the USB
cable. For other kits, refer to the kit user guide.
If you are developing on your own hardware, you need a
hardware debugger, for example, a Cypress
CY8CKIT-
002 MiniProg3
.
1. Select the PSoC Creator menu item
Debug > Select
Debug Target
, as
Figure 55
shows.
Figure 55. Selecting Debug Target
2. In the
Select Debug Target
dialog box, click
Port
Acquire
, and then click
Connect
, as
Figure 56
shows. Click
OK
to close the dialog box.
Figure 56. Connecting to a Device
3. Choose the
Debug > Program
to program the device
with the project, as
Figure 57
shows.
Figure 57. Programming the Device
4. You can view the programming status on the
PSoC Creator status bar (lower-left corner of the
window), as
Figure 58
shows,
Figure 58. Programming Status
