Getting Started With EZ-
BLE™ PRoC™ Module
www.cypress.com
Document No.: 001-96841 Rev. **
3
EZ-BLE PRoC Module Overview
The EZ-BLE PRoC Module (CYBLE-022001-00) is an integrated, fully certified BLE solution, which allows for rapid
development and deployment of your BLE-enabled product. This section will provide an outline of the mechanical structure of
the EZ-BLE PRoC Module. This information is necessary for customers designing their own PCB layout for this module.
The EZ-BLE PRoC Module ships with the necessary components required to achieve full BLE functionality. It includes:
PCB substrate: 10 mm × 10 mm × 0.5 mm
Cypress PRoC BLE chip (refer to
PRoC BLE Silicon Features
for information on the Cypress BLE chip)
Crystal oscillators
32.768 kHz watch crystal oscillator (WCO)
24.0 MHz internal main oscillator (IMO)
Chip antenna
Passives (resistor, capacitor, inductor)
Metal RF Shield
EZ-BLE PRoC Module Mechanical Dimensions
Figure 1
shows a physical picture of the EZ-BLE PRoC module.
Figure 1. EZ-BLE PRoC Module Top View (with and without Shield) and Side View
10.0 mm
Shield Outline
H = 1.10 mm
Chip Antenna
0.5 mm
1.3 mm
10.0 mm
Shield
For more details on the module dimensions, external component connections, and module placement recommendations, see
the EZ-BLE PRoC Module
datasheet specification
.
