Getting Started With EZ-
BLE™ PRoC™ Module
www.cypress.com
Document No.: 001-96841 Rev. **
31
12. Double-click on LED1 and change the name to
‗Advertising_LED‘ for LED1 as shown in
Figure 38
. Similarly rename the
other two LEDs as
‗Disconnect_LED‘ and ‗Alert_LED‘. Configure the LED as Strong drive mode.
Figure 38. Renaming a Pin Component
13. Double-click on SW1 and change the name to Wakeup_SW. Configure the pin as interrupt as shown in
Figure 39
and
Figure 40.
Figure 39. Digital Input Pin Configuration
