Cypress EZ-BLE PRoC AN9684, Getting Started

Page: 5 / 56

Getting Started With EZ-
BLE™ PRoC™ Module
www.cypress.com
Document No.: 001-96841 Rev. ** 5
The connection pad spacing is listed in Table 1 .
Table 1. EZ-BLE PRoC Module Connection Pad Spacing (Center-to-Center)
Pad X Pad Y
Pad Pitch
(Pad X - Pad Y) Comments
Bottom-Left Corner 1 1.64 mm Distance from bottom left corner to Pad 1 center
1 2 0.76 mm Distance from Pad 1 center to Pad 2 center
2 3 0.76 mm Distance from Pad 2 center to Pad 3 center
3 4 0.76 mm Distance from Pad 3 center to Pad 4 center
4 5 0.76 mm Distance from Pad 4 center to Pad 5 center
Top-Left Corner 6 0.81 mm Distance from top left corner to Pad 6 center
6 7 0.76 mm Distance from Pad 6 center to Pad 7 center
7 8 0.76 mm Distance from Pad 7 center to Pad 8 center
8 9 0.76 mm Distance from Pad 8 center to Pad 9 center
9 10 0.76 mm Distance from Pad 9 center to Pad 10 center
10 11 0.76 mm Distance from Pad 10 center to Pad 11 center
11 12 0.76 mm Distance from Pad 11 center to Pad 12 center
12 13 0.76 mm Distance from Pad 12 center to Pad 13 center
13 14 0.76 mm Distance from Pad 13 center to Pad 14 center
14 15 0.76 mm Distance from Pad 14 center to Pad 15 center
15 16 0.76 mm Distance from Pad 15 center to Pad 16 center
16 17 0.76 mm Distance from Pad 16 center to Pad 17 center
Top-Right Corner 18 1.50 mm Distance from top right corner to Pad 18 center
18 19 0.76 mm Distance from Pad 18 center to Pad 19 center
19 20 0.76 mm Distance from Pad 19 center to Pad 20 center
20 21 0.76 mm Distance from Pad 20 center to Pad 21 center
A list of the available I/Os and supported functionality for each I/O is shown in Table 2 .
Table 2. EZ-BLE PRoC Module Available Connections and Functionality
Module Solder Pad
Number
Silicon
Port Pin
Functionality
UART SPI I2C TCPWM CapSense
WCO
Out
EXT_CLK/
ECO_OUT
EXTPA_EN SWD GPIO
1
GND Ground Connection
2
P4[1] CTS MISO Yes Sensor/C
TANK
Yes
3
P5[1] TX SCLK SCL Yes Sensor Yes Yes
4
P5[0] RX SS SDA Yes Sensor Yes Yes
5
VDDR Radio Power Supply 1.9V to 5.5V