Getting Started With EZ-
BLE™ PRoC™ Module
www.cypress.com
Document No.: 001-96841 Rev. **
27
Figure 29.Enable/Disable Components
9. After performing the actions in step 7, you will see the schematic as shown in
Figure 22.
10. Add one more LED by selecting the following schematic and right-clicking
Copy
and
Paste
as shown in
Figure 30.
Figure 30 Adding One More LED
11. You can configure the Bluetooth Low Energy Component with the following properties by double-clicking on the
Component as shown in
Figure 31.
GAP peripheral role with Find Me Target (GATT server) configuration as shown in
Figure 31
Services and characteristics for Find Me profile are shown in
Figure 32
and can be left to default values
Limited advertisement mode with an advertising timeout of 30 seconds and fast advertisement interval of 20 to 30 ms
as show in
Figure 33
