cypress solutions CTM-200, Manual

Page: 48 / 58

Reporting
47
© 2021 Cypress Solutions Complete Manual: CTM-200 R2 (Revision 1.4)
X $PEVENT Cypress Proprietary NMEA Trigger/event message - $PEVENT (CTM-200 only)
X $PGRT Cypress Proprietary NMEA Geo-Route alarm/alert message with Modem ID - $PGRT (CTM-200 only)
1000-
1999
$PCYP Cypress Proprietary NMEA PCYP message
Other Vendor Proprietary NMEA Sentences
Decimal
ID
Message
Name Message Type Message description
129 $BTVEG Vendor Properietary NMEA Intergraph's GPS message
Cypress Solutions ULCP Messages
Decimal
ID
Message
Name
Message Type Message description
40 Cypress Proprietary Binary Device phone number, PAD Port/Type, serial port baud
85 ULCP Cypress Proprietary Binary ULCP binary format GPS data message
86 ULCP Cypress Proprietary Binary ULCP binary format GPS lat/lon message
88 ULCP Cypress Proprietary Binary
ULCP binary format acceleration/decleration event data
with GPS
89 ULCP Cypress Proprietary Binary
ULCP binary format Modem ID/firmware
revision/odometer data
90 ULCP Cypress Proprietary Binary ULCP binary format odometer data
92 ULCP Cypress Proprietary Binary
ULCP binary format wireless Link TX/RX Data Count with
Modem ID
93 ULCP Cypress Proprietary Binary ULCP binary message for panicreport (CTM-200 only)
97 ULCP Cypress Proprietary Binary ULCP binary format digital I/O with GPS (no events)
98 ULCP Cypress Proprietary Binary ULCP binary format digital input event data with GPS
99 ULCP Cypress Proprietary Binary ULCP binary format MIL status with number of DTC
111 ULCP Cypress Proprietary Binary
ULCP binary format with msg 112, CID, RPM, fuel level,
seatbelt, speed, rssi, sqi, accel, pdop
112 ULCP Cypress Proprietary Binary ULCP binary format modem ID with GPS
113 ULCP Cypress Proprietary Binary
ULCP binary format digital input/output (IO), modem ID,
with minimal GPS (time,lat/lon,validity) (CTM-200 only)
255 ULCP Cypress Proprietary Binary ULCP Custom Message- Flexible Format
255 ULCP Cypress Proprietary Binary
ULCP Custom Message for spreader controllers (CTM-
200 only)
Other Message Types
Decimal
ID
Message
Name
Message Type Message description
100 TAIP PV Standard TAIP GPS TAIP PV message
101 TAIP LN Standard TAIP GPS TAIP LN message
11.7
Report Triggered Scripts
The CTM-200 can be configured to execute a script or list of actions when a report is triggered. With report-
triggered scripts enabled a series of commands can be executed by the CTM-200 that can perform a series
of simple or complex tasks involving logic. The script is a linux shell script file (.sh) file that resides in the
CTM-200 non-volatile memory. The name of the script correlates to a specific report so whenever the
report is triggered, the script will execute if script execution is enabled.