Cypress Semiconductor CY8C23433, Specification Sheet

Page: 18 / 37

CY8C23433, CY8C23533
Document Number: 001-44369 Rev. *B Page 18 of 37
DC Operational Amplifier Specifications
The following table lists the guaranteed maximum and minimum specifications for the voltage and temperature ranges: 4.75V to 5.25V
and -40
°
C
≤
T
A
≤
85
°
C, or 3.0V to 3.6V and -40
°
C
≤
T
A
≤
85
°
C, respectively. Typical parameters apply to 5V and 3.3V at 25
°
C and
are for design guidance only.
The Operational Amplifier is a component of both the Analog Continuous Time PSoC blocks and the Analog Switched Cap PSoC
blocks. The guaranteed specifications are measured in the Analog Continuous Time PSoC block. Typical parameters apply to 5V at
25
°
C and are for design guidance only.
Table 13. 5V DC Operational Amplifier Specifications
Symbol Description Min Typ Max Units Notes
V
OSOA
Input Offset Voltage (absolute value)
Power = Low, Opamp Bias = High
Power = Medium, Opamp Bias = High
Power = High, Opamp Bias = High
–
–
– 1.6
1.3
1.2 10
8
7.5
mV
mV
mV
TCV
OSOA
Average Input Offset Voltage Drift – 7.0 35.0
μ
V/°C
I
EBOA
Input Leakage Current (Port 0 Analog Pins) – 20 – pA Gross tested to 1
μ
A
C
INOA
Input Capacitance (Port 0 Analog Pins) – 4.5 9.5 pF Package and pin dependent.
Temp = 25°C
V
CMOA
Common Mode Voltage Range
Common Mode Voltage Range (high power or high
opamp bias) 0.0 – Vdd
Vdd - 0.5
V The common-mode input
voltage range is measured
through an analog output
buffer. The specification
includes the limitations
imposed by the character-
istics of the analog output
buffer.
0.5 –
G
OLOA
Open Loop Gain
Power = Low, Opamp Bias = High
Power = Medium, Opamp Bias = High
Power = High, Opamp Bias = High
60
60
80
– – dB Specification is applicable at
high power. For all other bias
modes (except high power,
high opamp bias), minimum is
60 dB.
V
OHIGHOA
High Output Voltage Swing (internal signals)
Power = Low, Opamp Bias = High
Power = Medium, Opamp Bias = High
Power = High, Opamp Bias = High
Vdd - 0.2
Vdd - 0.2
Vdd - 0.5 –
–
– –
–
– V
V
V
V
OLOWOA
Low Output Voltage Swing (internal signals)
Power = Low, Opamp Bias = High
Power = Medium, Opamp Bias = High
Power = High, Opamp Bias = High
–
–
– –
–
– 0.2
0.2
0.5 V
V
V
I
SOA
Supply Current (including associated AGND buffer)
Power = Low, Opamp Bias = High
Power = Medium, Opamp Bias = Low
Power = Medium, Opamp Bias = High
Power = High, Opamp Bias = Low
Power = High, Opamp Bias = High
–
–
–
–
– 300
600
1200
2400
4600
400
800
1600
3200
6400
μ
A
μ
A
μ
A
μ
A
μ
A
PSRR
OA
Supply Voltage Rejection Ratio 52 80 – dB Vss
≤
VIN
≤
(Vdd - 2.25) or
(Vdd - 1.25V)
≤
VIN
≤
Vdd
[+] Feedback