CY3215-DK PSoC 1 In-Circuit Emulator Development Kit Guide, Doc. # 001-66514 Rev. *B
32
Code Examples
12.Configure the PWM8_1 properties, as shown in the following figure.
Figure 4-6. PWM8 User Module Properties
13.Next, route the PWM CompareOut signal to P2[0]. The first step is to configure the lookup table
(LUT) on Row_0_Output3.
Figure 4-7. Route PWM CompareOut Signal to P2[0]
14.Double-click the LUT, the Digital Interconnect window opens.
15.In this window, enable Row_0_Output_0_Drive_0 to connect to GlobalOutEven_0.
