17
CY3215-DK PSoC 1 In-Circuit Emulator Development Kit Guide, Doc. # 001-66514 Rev. *B
Using ICE-Cube Connector
Figure 3-5. Flex Cable and 29000-28 DIP
■
Foot: A foot is used to connect the pod to the MiniEval board. Each foot has a pinout that models
a PSoC, for example, a 28-pin DIP. A foot that emulates surface-mount components must be sol-
dered to target circuits. The main board of the pod can then be attached or removed, as desired.
Figure 3-6. 28-Pin DIP Feet
■
Plastic Mask: The plastic mask is used to orient the foot. Plastic masks are provided to expose
only the pins that connect to the foot.
Figure 3-7. Plastic Mask
