13
CY3215-DK PSoC 1 In-Circuit Emulator Development Kit Guide, Doc. # 001-66514 Rev. *B
Getting Started
2.3
PSoC Programmer
To open PSoC Programmer, click Start > All Programs > Cypress > PSoC Programmer <ver-
sion> > PSoC Programmer <version>.
To successfully program the device, follow these steps:
1. Select the ICE-Cube connectivity in Port Selection, as shown in
.
Figure 2-8. PSoC Programmer Window
2. Click the File Load button to load the hex file.
3. Select the device and device family from the list.
4. Click the Program button to program the selected PSoC 1 device.
5. Close PSoC Programmer.
Note For more details on PSoC Programmer, see the user guide at the following location:
<Install_directory>\Cypress\Programmer\<version>\Documents
