CYPRES 2 User Manual Download Page 14

Page: 14 / 72

page 14

- CYPRES 2 User’s Guide -

2.5 changeable MODE CYPRES

The changeable MODE CYPRES can be recog-

nized by the magenta button with the white imprint

„changeable MODE” on the control unit.

The user can switch this unit between the modes

Exp - Stu - Tan - Spe on his own. The device param-

eters are identical with the ones from the CYPRES

models

Exp

ert -

Stu

dent -

Tan

dem -

Spe

ed. All

handling is fully identical to these models.

When the unit is on, the current mode is indicated
by a digit below the appropriate engraved mode.

Note:

Default delivery setting of new changeable MODE

units is: Type Expert, scale feet, user-selectable ac-

tivation altitude adjustment A0 (see chapter 4.4.2)

unit set in Tandem mode

digit indicating

the mode

Inappropriate mode can result in false activation /

no activation.

Using an inappropriate mode is most likely to injure or

kill you or others.

Always use the unit in the appropriate mode.

Never, under any circumstances and for any reason,

use the device in an inappropriate mode.

Summary of Contents for 2









































































Search results

Summary of Contents for 2

Reviews:

Related manuals for 2

Brands by name

Popular brands

CYPRES 2, User Manual

Search results

Summary of Contents for 2

Reviews:

Related manuals for 2

Brands by name

Popular brands