CYP CPHD-V4L, Operation Manual, Page: 62 / 76

57
COMMAND
Description and Parameters
ASP_LAYOUT [Audio-Sample packet layout]
ASP_PLL [Audio-Sample packet PLL]
CHS_CODE [Channel-status audio coding]
CHS_SR [Channel-status sampling rate in kHz]
CHS_SS [Channel-status sampling size]
CHS_TYPE [Channel-status app type]
HBR [High-Bit-Rate packet status]
AIF [Display packet-AIF data in 2-digit hex]
AVI [Display packet-AVI data]
DRMI [Display packet-DRMI data]
GCP [Display packet-GCP data]
SPD [Display packet-SPD data]
VSI [Display packet-VSI data]
SCDC_SCR_ENABLE [Rx SCDC source enable scrambling state]
SCDC_SCR_STATUS [SCDC sink scrambling status]
SCDC_SINK_VER [SCDC sink version]
SCDC_SOURCE_VER [SCDC source version]
$TASK_MODE N1

Set the unit’s operation mode.
Available values for
N1 :
CABLE [Cable Test Mode]
ANALYSER [Analyzer Mode]
PATTERN [Pattern Mode]
$TASK_MODE?

Show the unit’s current operation mode.
$TIMER_DAY?

Show the unit’s test timer day value.
$TIMER_HOUR?

Show the unit’s test timer hour value.
$TIMER_MINUTE?

Show the unit’s test timer minute value.
$TIMER_SECOND?

Show the unit’s test timer second value.