CYP CPHD-V4L, Operation Manual, Page: 56 / 76

51
COMMAND
Description and Parameters
$HDCP_IN_VER N1

Set the HDCP version to use on the unit’s HDMI input.
Available values for
N1 :
V1.4 [HDCP v1.4 only]
V1.4+V2.2 [HDCP v1.4 & v2.2]
Note: Analyzer mode only.
$HDCP_IN_VER?

Show the current HDCP version used on the unit’s HDMI input.
$HDCP_OUT_SW N1

Enable or disable HDCP support on the unit’s HDMI output.
Available values for
N1 :
ON [Enable HDCP]
OFF [Disable HDCP]
Note: Pattern mode only.
$HDCP_OUT_SW?

Show the HDMI output’s HDCP status.
Note: A status of “Talk” means HDCP is currently performing
handshaking.
$HDCP_OUT_VER N1

Set the HDCP version to use on the unit’s HDMI output.
Available values for
N1 :
V1.4 [HDCP v1.4]
V2.2 [HDCP v2.2]
Note: Pattern mode only.
$HDCP_OUT_VER?

Show the current HDCP version for the output port.