CYP CPHD-V4L, Operation Manual, Page: 44 / 76

39
P09 - Color Bar
The Color Bar pattern is a series of repeating vertical
colored bars (white, yellow, cyan, green, magenta,
red, blue, black).
Note: Selecting this pattern will force the output color
range to change to “Full”.
P10 - Grayscale 256
The Grayscale 256 pattern provides a way to fine
tune the contrast, brightness and grayscale tracking of
your display with a full 265 step gradient progressing
from 0% to 100% brightness. When testing a display,
no color should be visible at any point across the
gradient, and the transition from black to white should
appear even and consistent.
Note: Selecting this pattern will force the output color
range to change to “Full”. This pattern is not available
when the resolution is below 1080i.
P11 - Line On/Off-V
The Line On/Off-V pattern generates an alternating
pattern of single-pixel vertical lines. This pattern can
be used to analyze the horizontal pixel resolution of
your display. If the output appears to have mosaic
patterns, or appears to be a solid field (grey, white or
black), then it is possible that your display does not
fully support the resolution you are currently sending
to it.
Note: When outputting 4K@50/60Hz the pattern will
consist of double, rather than single, pixel lines. Se-
lecting this pattern will force the output color range to
change to “Full”.