CYP CPHD-V4L, Operation Manual, Page: 37 / 76

32
HDR EMULATOR
2ND LEVEL
3RD LEVEL
EOTF [0] SDR Lumi Range
[1] HDR Lumi Range
[2] SMPTE ST2084.2
[3] Future EOTF
Metadata Descr. S. METADATA TYPE 1
Reserved
Max. Content L-L 0~65500 (0)
Max. FrameAve LL 0~65500
(0)
AVI Color Space
[Current Analytical Data]
Sink EDID HDR
1) HDR Out: Enable or disable the HDR output simulation mode.
Note: Enabling HDR will change the HDMI output’s AVI packets to
indicate an HDR signal to the connected display and activate the
connected display’s HDR mode, however all test patterns generated by
this unit will continue to be 8-bit color within the SDR color range.
2) AVI Colorimetry: Set the AVI colorimetry mode to report when HDR is
enabled.
3) EOTF:
Set the EOTF (Electro-Optical Transfer Function) to report when
HDR is enabled.
4) Metadata Descr: Set the metadata description to report when HDR is
enabled.
5) Max. Content L-L:
Set the maximum content light level to report when
HDR is enabled.
6) Max. FrameAve L-L: Set the maximum frame average light level to
report when HDR is enabled.
7) AVI Color Space:
Shows the currently active output color space.
8) Sink EDID HDR: Displays if the current display supports HDR or not.