CYP CDPS-UH4H1HFS, Operation Manual

Page: 13 / 32

DRAFT
8
6.6 RS-232 and Telnet Commands
COMMAND DESCRIPTION PARAMETER
HELP (?) Show Command List NONE
HELP N Show Descript Of
Command
N=COMMAND NAME
P0 Power Off (Standby) NONE
P1 Power On NONE
MUTE Show AMP Mute Mode NONE
MUTE N Set AMP Mute Mode N N=0 (UNMUTE), 1 (MUTE)
SPEAKER Show Speaker Input Source NONE
SPEAKER N Set Speaker Input Source N=0 (HDMI),
1=(OPTICAL)
AUDIOFMT Show EDID Audio Format NONE
AUDIOFMT N Set EDID Audio Format N N=0 (PCM), 1 (BYPASS)
SOUNDSYS Show AMP Sound System NONE
SOUNDSYS N Set AMP Sound System N N=0 (STEREO), 1 (MONO)
VOL Show AMP Volume NONE
VOL N Set AMP Volume N N=0-100
A N Select Input N N=1-4*
IPCONFIG Display The Current IP
Configure
NONE
SIPADDR XXX.XXX.
XXX.XXX
Set Ethernet IP Address XXX=0~255
SNETMASK XXX.XXX.
XXX.XXX
Set Ethernet Net Mask XXX=0~255
SGATEWAY XXX.XXX.
XXX.XXX
Set Ethernet Gateway XXX=0~255
HTTPPORT N Set Http Port Number N=0~65535
RSTIP IP Configuration Reset To
<DHCP>
NONE
EDIDMODE Show EDID Mode NONE
EDIDMODE N Set EDID Mode N=0 (Appoint), 1 (All)