DRAFT
4
6
MUTE Button and LED:
Press this button to mute the SPEAKER output
sound. The LED will illuminate when audio is set to mute either from
front-panel’s mute button, IR, Telnet, WebGUI or RS-232 and when
the input audio format is non-PCM the LED will be blinking. Press it
again to unmute and the LED will switch off.
Note:
For restore back to factory default, press and hold this button
then plug-in the AC power into the device.
7
SYNC LED:
This LED will illuminate when the input detected HDMI
signal from source equipment.
8
TRIGGER IN LED 1~4:
These LEDs will illuminate when IN connection
obtain active low DC voltage of 0~0.5V which is also when signals
has been triggered. Under normal operation, the voltage is about
3.3V.
Summary of Contents for CDPS-UH4H1HFS
Page 2: ...D R A F T ...
Page 30: ...D R A F T ...
Page 31: ...D R A F T ...
Page 32: ...D R A F T Home page http www cypress com tw CYPRESS TECHNOLOGY CO LTD ...