CYP CDPS-UH4H1HFS, Operation Manual

Page: 17 / 32

DRAFT
12
COMMAND DESCRIPTION PARAMETER
MACRO ADD N N1
N2 N3 N4 N5 .....N14
Add Macro N= Macro ID (1~15)
N1= Action ID (1~16)
N2= CMD ID (1~128)
N3= Delay in millisecond
(0,100~65535)
N4= System CMD
N5= Telnet IP string,
COM port, IR, Relay
N6=10~65000
MACRO del N N1 Delete Macro Command
Slot ID N= Macro ID (1~15)
N1=1~16
MACRO name N N1 Name Macro N= Macro ID 1~15
N1= Macro name up to
24 character
MACRO RUN N MACRO CONTROL
VER Show Unit Firmware Version NONE
REBOOT System Reboot NONE
FADEFAULT All Configure Set To Factory
Default
NONE
*HDMI input port 1~4
**Internal EDID selection 1~9/Deep color/2D3D/audio/resolution: (1)
HDMI output native, (2)8/2D/PCM/720p, (3) 8/2D/PCM/AC3/720p, (4)
8/2D/PCM/1080p, (5) 8/2D/PCM/AC3/1080p, (6) 8/2D/PCM/4K2K, (7)
8/2D/PCM/AC3/4K2K, (8) 8/2D/ Y420, (9) 8/2D/AC3/Y420
Note:
1. Any commands will not be executed unless followed by a carriage
return. Commands are case-sensitive.
2. Once the device is power cycled the EDID mode will return back to
Mode 1/HDMI output native.