CYCMOTOR X1 STEALTH GEN 3, User Manual, Page: 4 / 38

Do not install anything other than the parts and accessories that came
with this drive unit. Doing so could damage the product.
The drive system can be activated and deactivated by holding down the
on/off button the display.
Avoid changing the bke gear (note: this is different from the drive unit’s
assist level) while the drive unit is powering the bike. This may lead to
excessive wear on the chain and chain rings or other gear related failture.
When changing gear, use human input only. After the gear is changed,
you may accelerate again with the throttle or continue using the PAS.
Take off with the appropriate assist level & bike gear.
This product is splash proof and rain proof but NOT WATER PROOF. Do not
submerge it underwater.
If you require any more information or have any questions about the user
manual disclaimer, please feel free to contact us via email at
support@cycmotor.com or call +852 3690 8938.
All the information contained in this user’s manual is published in good
faith and for general informational purposes only. CYC Motor Ltd does
not make any warranties about the completeness of this information and
encourages further inquries as stated above if needed. CYC Motor Ltd will
not be held liable for any losses and/or damages in connection with the
use of this product. The use of this product is at the user’s own risk.
Notice: Please contact CYC Motor Ltd if you are unsure about the
assembly instructions or for any further assistance as CYC Motor Ltd will
be held liable for any losses and/ or damages created by the assembly.
3